Strip and refinish
Old finish removed back to the substrate, then fresh coats laid. The full reset for a floor that has gone too far to buff.
Commercial cleaning · Saint Paul
Floor Care Services in Saint Paul
Finish restored and protected on a cycle, before the surface underneath starts paying for it.
✓
Written cleaning scope
✓
Recurring schedules
✓
After-hours service available
✓
Local Saint Paul team
Built around your facility
Request a Callback
Floors are maintained, not just cleaned
Mopping removes what is on top of a floor. It does nothing for a finish that has worn through, grout that has darkened, or carpet holding years of traffic in the fibre. Those need their own treatments on their own cycle.
Left long enough the economics change entirely. A finish kept topped up is a recurring maintenance cost; a finish allowed to wear through to the tile or vinyl becomes a replacement cost, and replacement is the expensive end of this by a wide margin.
Which treatment a floor needs is a question about the surface and its traffic, not about how dirty it looks on the day. We identify the surface first, because the wrong product on the wrong floor does damage that cleaning cannot undo.
A dependable standard
Treatments and what each one is for
Scrub and recoat
Top layers cleaned off and recoated without a full strip. Cheaper and faster, and only works if you get to it in time.
Burnishing and buffing
Gloss restored and light scuffing removed on a finish still in good condition. The cycle that defers the two above.
Tile and grout
Grout lines cleaned where a mop simply pushes soil along them, with sealing offered afterwards to hold the result.
Carpet extraction
Hot water extraction for traffic lanes and entry areas, which hold soil long before the rest of the carpet shows it.
Recurring building care
Request a Callback
Surfaces we work on
As Saint Paul commercial cleaners, we typically build programs around recurring maintenance first, then add periodic tasks that keep the building from slipping over time.
Common inclusions in commercial cleaning Saint Paul facilities:
- ✓VCT and vinyl: The classic strip-and-refinish surface, where a maintained finish is doing the protecting.
- ✓Sealed concrete: Common in warehouses and newer commercial space; needs the right treatment for the sealer rather than a generic one.
- ✓Tile and grout: Hard surface where the tile looks fine and the grout is carrying the discolouration.
- ✓Commercial carpet: Entry zones and traffic lanes first, since they soil several times faster than the open floor.
- ✓Hardwood and laminate: Moisture-sensitive surfaces where the main job is cleaning without over-wetting.
If you manage a multi-tenant property, we can define responsibilities by suite versus shared areas so tenants and management are aligned. If your facility has security needs, we plan around them rather than forcing a one-size schedule.
Our office is located at 139 Eva St, Suite 5, Saint Paul, MN 55107, so dispatch and supply runs stay local and practical when needs change.
From walkthrough to upkeep
How a floor job runs
A documented process keeps cleaning expectations, building access, and ongoing quality aligned.
Identify the surface and the finish
What the floor is, what is on it and how much is left. This decides the treatment and rules others out.
Test a small area
A section is treated first so you can see the realistic result before committing the whole floor.
Schedule around the building
Finish work needs clear floor and cure time, so it is placed on evenings, weekends or a planned closure.
Walk it dry, then set the cycle
We look at the finished floor together and agree how often it needs revisiting to stay there.
Clear pricing factors
How floor care is quoted
Floor care is quoted per project, because the published per-visit and monthly bands for recurring cleaning describe a different kind of work. Two rooms of identical size can differ by several times in cost depending on surface, how much old finish has to come off, how much furniture moves and whether the floor can be closed long enough to cure.
Request a CallbackWe will test a section before you commit the whole floor.
Request a Callback
Helpful details
Before you commit a floor to a treatment
How often does a finished floor need refinishing?
Traffic decides it, not the calendar. A busy entrance might need a full strip every year or two while a back office goes much longer, and buffing on a regular cycle stretches both. The honest answer comes from looking at how much finish is left.
Can you do this without closing the area?
Buffing and carpet work, usually yes. Stripping and refinishing, no: the floor must be clear and then left alone to cure. We schedule those for evenings, weekends or a planned closure, and we would rather move the date than rush the cure.
Will refinishing fix scratches in the tile itself?
It fixes the finish, not the substrate. Damage in the tile or vinyl underneath stays, which is exactly why a maintained finish matters: the finish is the layer meant to take the wear instead of the floor.
Is grout cleaning worth it, or should we regrout?
Clean it first, then decide. A great deal of what reads as ruined grout is soil in a porous surface, and it comes back further than people expect. Sealing afterwards is what keeps the result rather than repeating it next year.
How soon can carpet be walked on after extraction?
Walkable within a few hours and fully dry overnight in most rooms, assuming airflow. We plan around your opening time rather than leaving you to guess whether it is ready.
Do you move the furniture?
Light furniture yes, as part of the work. Heavy or fragile items and anything with cabling are agreed in advance, because dragging a desk across a stripped floor undoes the job underneath it.
Your facility plan starts here
Have a floor that has gone past mopping?
Send us the surface type and roughly the area, and we will tell you which treatment it is a candidate for.
Request a quote
Tell us about your space
Send the details and we will arrange a free walkthrough, then put the scope and the figure in writing before anything starts.